Bone Reduction Forceps 5.5 Inch – Curved Serrated Jaws with Ratchet Lock

Bone Reduction Forceps 5.5 Inch – Curved Serrated Jaws with Ratchet Lock

Overview

The Bone Reduction Forceps 5.5 Inch is a specialized orthopedic bone holding instrument designed to assist surgeons in grasping, aligning, and temporarily stabilizing bone fragments during fracture reduction and fixation procedures. Featuring curved serrated jaws, elongated shanks, a ratchet locking mechanism, and finger-ring handles, these forceps offer controlled mechanical gripping for selected orthopedic applications.

With an overall length of 5½ inches (approximately 13.97 cm), the instrument has a compact design suitable for surgical procedures requiring careful handling and access. The polished metallic body and curved gripping surfaces make it a practical addition to professional orthopedic instrument collections.

Key Features

• 5.5-Inch Overall Length: Compact size measuring approximately 13.97 cm.
• Curved Serrated Jaws: Interlocking toothed surfaces designed to engage suitable bone fragments.
• Ratchet Locking Mechanism: Allows the operator to maintain a selected gripping position.
• Finger-Ring Handles: Two rounded rings support controlled manual manipulation.
• Curved Jaw Profile: Designed to provide contact with appropriate bone surfaces.
• Polished Metallic Construction: Smooth silver-colored finish with a rigid instrument profile.
• Manual Operation: Mechanical opening, closing, and locking without powered components.
• Orthopedic Application: Intended for trained surgical professionals during selected fracture reduction procedures.

Curved Serrated Jaw Design

The Bone Reduction Forceps 5.5 Inch features curved working jaws with visible serrations along their inner gripping surfaces. The opposing teeth are intended to provide mechanical engagement with suitable bone structures during temporary holding and fragment positioning.

The curved jaw profile helps the operator approach bone surfaces from an appropriate angle, depending on the surgical site. Correct placement and controlled force are essential to avoid unintended bone damage or injury to adjacent tissues.

Ratchet Locking Mechanism

The instrument features a toothed ratchet near its ring handles. This mechanism allows the jaws to remain in a selected closed position without continuous squeezing of the handles.

During professional use, the ratchet may help maintain temporary fixation while the surgeon performs other steps of a fracture reduction or stabilization procedure. The locking teeth should be inspected before use to confirm proper engagement and release.

Finger-Ring Handle Construction

Two oval finger rings provide gripping points for opening and closing the instrument. The handles connect to elongated metal shanks that transfer movement to the curved jaws.

The handle arrangement supports controlled manual positioning, while the compact overall length provides an alternative to larger bone reduction forceps for suitable procedures. Instrument choice should be based on clinical requirements rather than length alone.

Orthopedic Surgical Applications

Potential professional applications include:

• Temporary holding of selected bone fragments during fracture reduction.
• Assisting with positioning and alignment before internal fixation.
• Stabilizing suitable bone segments during orthopedic procedures.
• Supporting selected trauma surgery and fracture management techniques.
• Inclusion in orthopedic bone holding and reduction instrument sets.

Appropriate use depends on fracture configuration, bone quality, anatomical access, and the operating surgeon’s professional judgment.

Handling and Safety

Bone reduction forceps are intended for temporary mechanical manipulation of suitable bone fragments. The surgeon should select an appropriate jaw position and apply only the force required for the procedure.

Excessive compression or improper placement may damage bone or surrounding tissues. The instrument should be used only by trained healthcare professionals and should not be considered a substitute for definitive fracture fixation.

Cleaning, Inspection, and Sterilization

Before each procedure, inspect the serrated jaws, hinge, ratchet teeth, shanks, and finger rings for visible wear, deformation, or corrosion. Verify that the instrument opens, closes, and locks correctly.

Follow the manufacturer’s validated cleaning, lubrication, sterilization, and reprocessing instructions. Confirm the exact metal grade and reuse specifications before clinical application.

Why Choose Bone Reduction Forceps 5.5 Inch?

The Bone Reduction Forceps 5.5 Inch combines a compact profile, curved serrated jaws, and a ratchet locking mechanism in a traditional orthopedic surgical instrument design. Its mechanical gripping features provide a practical option for selected bone reduction and temporary holding procedures.

Suitable for hospitals, orthopedic surgical departments, trauma care facilities, and professional surgical instrument suppliers, this instrument can be included in specialized bone holding collections and orthopedic equipment catalogs.

Product Specifications

Product Name: Bone Reduction Forceps 5.5 Inch
Reference Model: SM1484
Product Type: Orthopedic Bone Holding Forceps
Overall Length: 5½ Inches (13.97 cm)
Jaw Design: Curved Serrated Jaws
Locking Mechanism: Ratchet Lock
Handle Design: Finger-Ring Handles
Appearance: Polished Silver-Colored Metal
Operation: Manual
Main Category: Orthopedic Instruments
Subcategory: Bone Holding Instruments
Primary Application: Temporary Bone Fragment Holding and Reduction